Front

REMOVAL
1. Drain coolant system.
2. Remove left side lower column cover. Service and Repair
3. Remove steering column assembly. Service and Repair

Interconnect And Bracket:

4. Remove B/P to body harness interconnect and bracket.

Lower Silencer Boot:

5. Remove lower silencer boot at base of steering shaft.
6. Pinch off heater lines under the hood.

Heater Core Plate And Tubes:

7. Remove heater core cover. Insert a small amount of towels under the heater core tubes. Remove heater core plate and tubes.

Depress Clips:

8. Depress heater core retaining clips.

Accelerator Pedal:

9. Pull up on accelerator pedal and slide heater core past.

Brake Pedal:

10. Depress brake pedal and remove heater core from HVAC housing.

INSTALLATION
For installation, reverse the above procedures.

Install screws to retain heater core in housing.Replace heater core tube inlet O-rings. Tighten heater core tube retaining plate to 3 ± 1 Nm (27 ± 9 in. lbs.) torque.