Child Seat Module
CHILD SEAT MODULEREMOVAL
1. Close child restraint seat.
2. Remove seat back cover.
Fig. 1:
3. Remove screws attaching child restraint seat module hinges to seat back frame lower rail (Fig. 1).
4. Return seat back to upright position.
Fig. 2:
5. Disengage push in fasteners attaching upper bolster to child restraint seat module (Fig. 2).
6. Remove screws attaching top of module to seat back frame upper rail (Fig. 3).
Fig. 3:
7. Remove child restraint seat module from seat back (Fig. 4).
INSTALLATION
Fig. 4:
1. Place child restraint seat module in position on seat back (Fig. 4).
Fig. 5:
2. Position seat back hinge interlock lever over the top of the outboard child restraint seat hinge (Fig. 5).
Fig. 1:
3. Install screws attaching child restraint seat module hinges to seat back frame lower rail (Fig. 1).
Fig. 3:
4. Install screws attaching top of module to seat back frame upper rail (Fig. 3). Tighten nuts to 7 N.m (62 in.lbs.) torque.
Fig. 1:
5. Install push in fasteners attaching upper bolster to child restraint seat module (Fig. 2).
6. Return seat back to folded position.
7. Install seat back cover.
8. Verify child restraint seat operation.