Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2000 >> Voyager V6-3.8L VIN L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair

REMOVAL

Ignition Coil Removal:




1. Remove spark plug cables from coil. Always twist the spark plug boots to break the seal with the plug and pull straight back on the boot.
2. Remove ignition coil electrical connector.
3. Remove ignition coil mounting screws.
4. Remove ignition coil.

INSTALLATION
1. Install ignition coil.
2. Install ignition coil mounting screws. Tighten mounting screws to 12 Nm (105 in. lbs.) torque.
3. Install ignition coil electrical connector.
4. Transfer spark plug cables to new coil pack. The coil pack towers and cables are numbered with the cylinder identification.
pro multis · About Operation CHARM