Headrest

HEADREST

REMOVAL

1. Lower head restraint slightly.

Fig. 3:

2. Insert a stiff wire into the hole on the right hand side head restraint sleeve/guide and push to release latch (Fig. 3).
3. At the same time, press the button on the head restraint sleeve/guide left hand side and pull upward to release the head restraint.
4. Remove head restraint from seat back.

REMOVAL - AIRBAG EQUIPPED

WARNING:
- DISCONNECT AND ISOLATE THE NEGATIVE BATTERY CABLE REMOTE TERMINAL BEFORE BEGINNING ANY FRONT SEAT REMOVAL OR INSTALLATION PROCEDURE. THIS WILL DISABLE THE AIRBAG SYSTEM. FAILURE TO DISCONNECT THE BATTERY COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
- ONCE THE NEGATIVE CABLE IS DISCONNECTED WAIT FOR 2 MINUTES BEFORE REMOVING ANY AIRBAG SYSTEM COMPONENTS.

1. Disconnect the remote negative battery cable.
2. If fully extended, lower head restraint slightly.

Fig. 4:

3. Insert a stiff wire into the hole on the right hand side head restraint sleeve/guide and push to release latch (Fig. 4).
4. At the same time, press the button on the head restraint sleeve/guide and pull upward to release the head restraint.
5. Remove head restraint from seat back.

INSTALLATION

1. Place head restraint in position.
2. Push head restraint down into the lock position.
3. Raise head restraint to ensure it locks at the last stop.

INSTALLATION - AIRBAG EQUIPPED

1. Place head restraint in position.
2. Push head restraint down into the lock position.
3. Raise head restraint to ensure it locks at the last stop.
4. Connect the remote negative battery cable.