Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2001 >> Intrepid (CANADA) V6-2.7L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Seat Track & Recliner Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Track & Recliner Assembly

SEAT TRACK & RECLINER ASSEMBLY

REMOVAL

WARNING:
- DISCONNECT AND ISOLATE THE NEGATIVE BATTERY CABLE REMOTE TERMINAL BEFORE BEGINNING ANY FRONT SEAT REMOVAL OR INSTALLATION PROCEDURE. THIS WILL DISABLE THE AIRBAG SYSTEM. FAILURE TO DISCONNECT THE BATTERY COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
- ONCE THE NEGATIVE CABLE IS DISCONNECTED WAIT FOR 2 MINUTES BEFORE REMOVING ANY AIRBAG SYSTEM COMPONENTS.

1. Remove seat cushion side shield.

Fig. 28:




2. Remove bolts attaching seat back recliner to seat back frame on each side of seat (Fig. 28).

Fig. 29:




3. Remove bolts attaching seat adjuster to cushion pan (Fig. 29).
4. Disconnect wire harness fasteners from cushion pan.
5. Remove seat adjuster from seat cushion.

INSTALLATION

1. Place seat adjuster in position on seat cushion pan.
2. Connect wire harness fasteners to the cushion pan.
3. Install bolts attaching seat adjuster to cushion pad.
4. Install seat back.
5. Install bolt attaching seat back recliner to seat back on each side of seat. Tighten bolt to 8 N.m (71 in.lbs.) torque.
6. Install the seat cushion side shields.
pro multis · About Operation CHARM