Horn: Service and Repair

Negative Battery Cable Remote Terminal:

REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Disconnect wire connector.
3. Remove the horn bracket mounting bolt and remove horn.

NOTE: Do not disconnect horn from horn bracket.

INSTALLATION
1. Position both horns and the mounting bracket onto the vehicle as a unit.
2. Install and tighten the screw that secures the horn mounting bracket to vehicle. Tighten the screw to 11.3 Nm (100 in. lbs.).
3. Connect the wire connector.
4. Reconnect the battery negative cable.