Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2001 >> Intrepid (CANADA) V6-2.7L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Hose >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Washer Hose: Service and Repair

REMOVAL
1. Remove left headlamp unit. Refer to Electrical, Lamps/Lighting - Exterior, Headlamp Unit, Removal.
2. Remove underhood silencer pad clips only along left rear of hood.
3. Carefully pull silencer pad away from hood.
4. Disconnect "Y" connector from hood.
5. Disconnect right and left hood nozzle hoses at "Y" connector.
6. Disconnect hose clips from hood, tower to tower beam, and fender beam.
7. Disconnect washer hose from top of reservoir and from washer pump discharge port.
8. Carefully pull washer hose up through engine compartment.

INSTALLATION
1. Route washer hose up through engine compartment.
2. Connect washer hose to top of reservoir and to washer pump discharge port.
3. Connect hose clips to hood, tower to tower beam, and fender beam.
4. Connect right and left hood nozzle hoses at "Y" connector.
5. Connect "Y" connector to hood.
6. install the underhood silencer pad clips along left rear of hood.
7. Install the left headlamp unit. Refer to Electrical, Lamps/Lighting - Exterior, Headlamp Unit, Installation.
Be sure to test and check system for leaks and pinched or kinked hoses.
pro multis · About Operation CHARM