Wiper Blade Element Replacement

REMOVAL
1. Remove wiping element from blade assembly by grasping and pulling stopper of blade element out of end claw together with vertebra (metal rails).
2. Remove wiping element and vertebra by sliding them out of claws.

Windshield Wiper Blade Element:

3. Remove vertebra from wiping element.

INSTALLATION
1. Install the vertebra onto the wiping element.
2. Install the wiping element and vertebra into the blade assembly by sliding them into the claws.

NOTE: Install right blade element vertebra to match the shape of the windshield. Install vertebra with curve down. Install left blade element vertebra flat.

3. Check that blade element and vertebra are through all the claws and the final claw is locked in the stopper. Assure element locked end is closest to wiper system pivot.