Panel - Trim

PANEL - TRIM

REMOVAL




1. Open the decklid (1).
2. Remove the emergency release handle from the opening in the trim panel (2).
3. Using a trim stick C-4755 or equivalent, remove the trim panel by releasing the snap retainers from the decklid.

INSTALLATION




1. Position the trim panel (2) to the decklid (1).
2. Engage the snap retainers that secure the trim panel to the decklid. Make sure the retainers are fully engaged.
3. Install the emergency release handle into the opening in the trim panel.
4. Verify decklid operation.