Inside Rear View Mirror

INSIDE REAR VIEW MIRROR

REMOVAL

COUPE




1. Loosen the mirror base set screw.
2. Slide the mirror base upward and off the bracket.

CONVERTIBLE




1. Loosen the mirror base set screw (4).
2. Slide the mirror base upward and off the bracket.
3. Disconnect wire harness (2), if equipped.

INSTALLATION

COUPE




1. Position the mirror base at the bracket and slide it downward onto the support bracket.
2. Tighten the setscrew 1 N.m (15 in. lbs.).
3. If compass equipped. Technician must perform compass calibration.

CONVERTIBLE




1. Connect wire harness (2), if equipped.
2. Slide the mirror base downward and onto the bracket.
3. Tighten the mirror base set screw (4).
4. If compass equipped. Technician must perform compass calibration.