System Specifications
POWER STEERING FASTENER TORQUEPower Steering Fluid Cooler:
Mounting Screws 10 Nm (90 inch lbs.)
Power Steering Fluid Pressure Hose:
Tube Nut At Gear 47 Nm (35 ft. lbs.)
Tube Nut At Pump 68 Nm (50 ft. lbs.)
Hose Routing Clamp Bolt-Engine Front 61 Nm (45 ft. lbs.)
Hose Routing Clamp Bolt-Structural Collar 61 Nm (45 ft. lbs.)
Power Steering Fluid Pressure Switch:
Switch 8 Nm (70 inch lbs.)
Power Steering Pump:
Pressure Fitting 88 Nm (65 ft. lbs.)
Mounting Bolts 28 Nm (250 inch lbs.)
Rear Support Bracket To Engine Bolts 54 Nm (40 ft. lbs.)
POWER STEERING PUMP FLOW
Power Steering Pump Flow:
At 1500 RPM And Minimum Pressure 4.2 to 4.9 Liters/Min (1.5 to 1.7 GPM)
Control Valve Pressure Relief 9308 to 9998 kPa (1350 to 1450 psi)
POWER STEERING GEAR FASTENER TORQUE
Outer Tie Rod:
Steering Knuckle Nut 55 Nm (40 ft. lbs.)
Tie Rod Jam Nut 75 Nm 55 ft. lbs.
Steering Gear:
Mounting Bolts 61 Nm (45 ft. lbs.)
Tube Nuts At Gear 47 Nm (35 ft. lbs.)
Suspension Crossmember (Front):
Mounting Bolts Through Lower Control Arm 250 Nm (185 ft. lbs.)
All Other Mounting Bolts 153 Nm (113 ft. lbs.)
STEERING COLUMN FASTENER TORQUE
Steering Column:
Mounting Nuts 17 Nm (150 inch lbs.)
SKIM Mounting Screws 3 Nm (25 inch lbs.)
Steering Column Lower Coupling:
Pinch Bolt 28 Nm (250 inch lbs.)
Steering Wheel:
Retaining Bolt 54 Nm (40 ft. lbs.)
Speed Control Switch Screw 2 Nm (20 inch lbs.)