Front Door Inner Belt Weatherstrip
FRONT DOOR INNER BELT WEATHERSTRIPREMOVAL
COUPE
1. Remove door trim panel.
2. Remove inner belt weatherstrip from door. If necessary, use a rubber mallet and a block of wood, tapping upward at each clip attaching the molding to the door.
CONVERTIBLE
1. Remove door trim panel.
2. Pull upward on rear edge of inner belt weatherstrip.
3. Remove weatherstrip from vehicle.
INSTALLATION
COUPE
1. Align the weatherstrip to the "A" and "B" pillars. Push down on weatherstrip to engage channel to door panel.
2. Install door trim panel.
CONVERTIBLE
1. Start leading edge of weatherstrip on vehicle.
2. Press the leading edge of the weatherstrip forward until edge is tight to the mirror flag.
3. Press weatherstrip into position on door panel.
4. Install door trim panel.