Front Door Outer Belt Weatherstrip
FRONT DOOR OUTER BELT WEATHERSTRIPREMOVAL
COUPE
1. Open door glass.
2. Remove weatherstrip screw at the rearward edge of door.
3. Pull upward at rear end of outer belt weatherstrip (2).
4. Remove outer belt weatherstrip (2) from vehicle.
CONVERTIBLE
1. Open door glass.
2. Remove weatherstrip screw at the rearward edge of door.
3. Pull upward at rear end of outer belt weatherstrip (2).
4. Remove outer belt weatherstrip (2) from vehicle.
INSTALLATION
COUPE
1. Starting at leading edge of door, press weatherstrip (2) into position.
2. Install screw into weatherstrip (2).
3. Operate window and check for interference.
CONVERTIBLE
1. Place belt molding in position.
2. Starting at leading edge of door, press weatherstrip into position
3. Install screw (1) into weatherstrip.
4. Operate window and check for interference.