Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2001 >> Sebring Convertible V6-2.7L VIN U >> Repair and Diagnosis >> Brakes and Traction Control >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair

REMOVAL
1. Disconnect the battery negative cable.
2. Raise vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
3. Pull up on the CAB connector lock and disconnect the 2-way electrical connector and the pump/motor connector from the CAB.
4. Remove the bolts securing the integrated control unit's (ICU's) mounting bracket to the lower radiator support.
5. Carefully move the ICU toward the right side of the car. Move the ICU far enough to access the CAB mounting screws. Be careful not to bend the brake tubes connected to the ICU.
6. Remove the screws securing the CAB to the HCU. Remove the CAB.

INSTALLATION
1. Install screws to secure the CAB to the HCU. Tighten the mounting screws to 2 Nm (17 in. lbs.) torque.
2. Remount the ICU mounting bracket to the lower radiator support. Tighten the mounting bolts to 28 Nm (21 ft. lbs.) torque.
3. Reconnect the 24-way electrical and the pump/motor connector.
4. Lower vehicle.
5. Connect negative battery cable.
6. Connect a DRB III to the vehicle and initialize the system.
pro multis · About Operation CHARM