Quarter Window Glass: Service and Repair

ADJUSTABLE QUARTER GLASS JR-27 (Convertible)

REMOVAL

1. Raise quarter glass to full up position, if possible, to aid in removal.
2. Remove quarter trim panel.
3. Partially lower convertible top.
4. Disconnect wire connector to power window motor.

Fig. 1:

5. Remove fasteners holding quarter window module to inner quarter panel (Fig. 1).
6. Lift quarter window module upward and out opening at top of quarter panel.

Fig. 2:

7. Separate quarter glass from quarter window module (Fig. 2).

INSTALLATION

1. Lower quarter window module into position through opening in top of quarter panel.
2. Install fasteners holding quarter window module to inner quarter panel.
3. Connect wire connector to power window motor.
4. Raise glass lift channel to full up position.
5. Position quarter glass on quarter window module.
6. Loosely install fasteners holding quarter glass to quarter window module.
7. Lower and secure convertible top.
8. Adjust quarter glass as necessary.
9. Install quarter trim panel.