Incomplete Latch Cinch - No Current

Tests 1 - 2:

Tests 3 - 6:

SYMPTOM
INCOMPLETE LATCH CINCH - NO CURRENT

WHEN MONITORED
Whenever the power sliding door in operating in the closing direction.

SET CONDITION
The cinch operation was not completed in 4 seconds and the current did not build up to stall level. This code is set only during the cinching operation after a 4 second time out.

POSSIBLE CAUSES
- DTC present
- Binding door
- Cinch/release motor clutch driver wire open
- Cinch/release motor latch driver wire open
- Cinch/release motor unlatch driver wire open
- Latch assembly