Front Fender Liner: Service and Repair

WHEELHOUSE SPLASH SHIELD

REMOVAL

1. Hoist and support vehicle on safety stands.
2. Remove front wheel.
3. Remove strut assembly from vehicle.

Fig. 6:

4. Remove screws attaching speed sensor bracket (Fig. 6). Move bracket to access speed sensor wire connector.
5. Disconnect speed sensor wire connector.
6. Remove fasteners attaching splash shield to inner wheelhouse.
7. Remove splash shield from vehicle.

INSTALLATION

1. Place splash shield into position.
2. Install fasteners to attach splash shield.
3. Connect speed sensor wire connector.
4. Install screws attaching speed sensor bracket.
5. Install strut assemble.
6. Install front wheel.
7. Lower vehicle.