Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2003 >> PT Cruiser L4-2.4L Turbo VIN G >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Keyless Entry Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Entry Module: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel top cover.

Fig. 2 RKE Module Remove/Install:




3. Remove the two screws holding the RKE module to the instrument panel assembly.
4. Slide locking tab of the wiring connector sideways to unlock tab, and remove connector from RKE module.
5. Remove RKE module from vehicle.

NOTE: When replacing a faulty RKE Module, the replacement module must be configured with the DRB III(R) scan tool for proper operation. Refer to Vehicle Theft/Security Systems, Switching Operating Modes/configuring a New Module under Service Procedures. Additionally, all transmitters must be reprogrammed to the new RKE module.

INSTALLATION
1. Install the RKE module on instrument panel.
2. Connect the wiring harness connector to the RKE module. Slide locking tab of the wiring connector sideways to lock tab.
3. Install the two screws holding the RKE module to the instrument panel assembly.
4. Install the instrument panel top cover.
5. Connect the battery negative cable.
pro multis · About Operation CHARM