Fog Lamp Unit Alignment

FOG LAMP UNIT ALIGNMENT

Prepare an alignment screen (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEAD- LAMP UNIT - STANDARD PROCEDURE) and read the Alignment Screen Preparation paragraph. Turn ON the headlamp switch to the parking lamps only position and actuate the fog lamp switch. A properly aligned fog lamp will project a pattern on the alignment screen with the top of the cut-off line 10 cm (4 in.) below the fog lamp center line and straight ahead with the vehicle 25 feet from the alignment screen.

Fig.2 Lamp Alignment Screen:

To adjust fog lamp unit alignment, rotate the alignment screw located on the side of the fog lamp unit from the cooling opening in the fascia, just inboard of the fog lamp opening, to achieve the specified pattern position.