A/C - Mode/Temperature Lever Service

NUMBER: 24-019-05

GROUP: Heating & A/C

DATE: November 1, 2005

THIS BULLETIN SUPERSEDES SERVICE BULLETIN 24-002-01, DATED FEBRUARY 16, 2001, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE ADDITIONAL MODEL YEARS AND A REVISED DISCUSSION.

SUBJECT:
HVAC Mode And Temperature Lever Service

OVERVIEW:
This bulletin describes new parts that are available for HVAC service.

MODELS:

2001 - **2005** (ST) Sebring/Stratus Coupe

DISCUSSION:





The mode (Fig. 1) and temperature (Fig. 2) linkage levers have been made available as service components for the HVAC assembly. If either lever is broken or damaged, the linkage levers can be replaced separately as compared to replacing the HVAC assembly.

To replace either lever, remove the cable from the lever and HVAC case attachment, remove the lever mounting screw and secure the new lever in place of the broken one.

NOTE:
THE FLOOR DUCT MUST BE SET ASIDE TO GAIN ACCESS TO THE MODE LEVER. PULL THE DUCT OUT AND ROTATE IT ON THE ATTACHING RIVET.

**Follow the adjustment procedures outlined in TechCONNECT, under: Service Info, 24-Heating And Air Conditioning, Heater Control Assembly And A/C Switch, Installation Service Points.**





PARTS REQUIRED:





TIME ALLOWANCE:





FAILURE CODE:

Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.