Lumbar Support

LUMBAR SUPPORT

REMOVAL

Fig. 101:

1. Remove screw attaching lumbar handle to seat back (Fig. 101).
2. Remove seat back assembly from cushion.
3. Detrim the seat back assembly.
4. Remove frame and replace.

INSTALLATION

1. Trim the seat back frame.
2. Install seat back assembly to cushion.
3. Install attaching screw to lumbar handle. The handle is to be installed, between two and three O'clock position. Tighten screw to 1 N.m (9 ft.lbs.) torque.
4. Test lumbar operation.