Armrest Rotating Assembly

ARMREST ROTATING ASSEMBLY - SECOND ROW - STOW -N-GO

REMOVAL

1. Remove headrest and headrest sleeves.
2. Remove both armrest.
3. Remove seat back panel.

Fig. 49:

4. Disengage J-strap from seat back (Fig. 49).
5. Move seat back cover and foam to access the armrest rotating assembly.

Fig. 50:

6. Remove armrest rotating assembly attaching screws (Fig. 50).
7. Remove armrest rotating assembly from the seat back frame.

INSTALLATION

1. Place armrest rotating assembly into position (Fig. 50).
2. Install two armrest rotating assembly attaching screws. Tighten to 10 N.m (88 in.lbs).
3. Move seat back cover and foam to into proper position and engage J-straps (Fig. 49).
4. Install seat back panel.
5. Install both armrest.
6. Install headrest sleeves and headrest.