Procedures

REMOVAL
1. Disconnect and isolate the battery negative cable
2. Remove the headlamp unit.

Fig.13 Headlamp Unit:

3. Remove the cover (high beam lamp) or rubber boot (low beam lamp) to access bulbs.
4. Disconnect the wire harness connector.
5. Disengage spring clip from headlamp.
6. Pull headlamp bulb from back of headlamp unit.

INSTALLATION
1. Insert headlamp bulb into headlamp unit.
2. Engage spring clip to headlamp.
3. Connect wire harness connector.
4. Install the cover (high beam lamp) or rubber boot (low beam lamp) to headlamp unit.
5. Install the headlamp unit.
6. Connect the battery negative cable.