System Test

SYSTEM TEST
A test of the Tire Pressure Monitoring System can be initiated in the EVIC. The test sequence is as follows:
1. Perform the RETRAIN TIRE SENSORS procedure.
2. Press and hold the RESET and STEP buttons for five seconds.
3. The EVIC will display BUCKET COUNTERS.
4. Drive the vehicle at 32 km/h (20 mph) for at least 2 minutes.
5. The counters will increase by one each time a Sensor/Transmitter signal is received by the EVIC.
6. Observe that the COUNTERS register at least 3 receptions for each Sensor/Transmitter.
7. Replace any Sensor/Transmitter that does not meet specification.
8. The test will continue until any EVIC button is pressed or until the ignition is cycled to OFF.