Cruise Control Switch: Service and Repair
REMOVALThe speed control switches are mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO THE RESTRAINT SYSTEMS SECTION FOR MORE INFORMATION.
1. Remove the negative battery cable.
2. Turn OFF ignition.
3. Remove the air bag, refer to the restraint section for more information.
4. Remove the screw from bottom of the switch.
5. Remove switch from steering wheel.
6. Disconnect two-way electrical connector.
7. Repeat for the other switch.
INSTALLATION
The speed control switches are mounted in the steering wheel and wired through the clock spring device under the airbag module.
WARNING: IF REMOVAL OF AIRBAG MODULE IS NECESSARY, REFER TO THE RESTRAINT SYSTEMS SECTION FOR MORE INFORMATION.
1. Connect two-way electrical connector.
2. Install switch.
3. Install screw for the switch.
4. Repeat for the other switch.
5. Install the air bag, refer to the restraint section for more information.
6. Install the negative battery cable.