Lower Side Moulding / Trim: Service and Repair

ROCKER PANEL MOLDING

REMOVAL
1. Raise and support the vehicle.




2. Remove the front wheel liner.
3. Lower the vehicle.
4. Remove the screws attaching the rocker panel (2) to the vehicle
5. Remove the screws attaching the lift pads (1) to the vehicle
6. Remove the rocker panel (2).

INSTALLATION
1. Install the rocker panel.
2. Install the screws attaching the lift pads to the vehicle.
3. Install the screws attaching the rocker panel to the vehicle.
4. Raise and support the vehicle.
5. Install the front wheel liner.
6. Lower the vehicle.