Lower Instrument Panel (Left)

REMOVAL

1. Remove the air nozzle.




2. Remove the screw (3) attaching the cover under the steering column then remove the cover (2).
3. Remove the fuse panel cover.
4. Remove the screws (1) attaching the lower instrument cover (5) to the illumination control module (4) and the side of the instrument panel to the support bar (6).
5. Remove the illumination control module (7).

NOTE: Do not unscrew pedal cover (1).




6. Remove the screws (arrows) in the under side cover (2).
7. Pull the lower instrument cover (2) off of the upper instrument panel cover.




8. Remove the screw (2) attaching the hood latch release handle bezel to the lower instrument panel and then guide the handle through the lower cover (1).




9. Separate the lower panel (2) from the upper panel (1) and then remove the lower instrument panel.

INSTALLATION




NOTE: When installing, insert the front tabs on the pedal lower instrument panel below the floor covering.

1. Install the lower instrument panel (2) upward and toward the front.




2. Guide the hood latch release handle (2) through the lower instrument panel (1) then install the screw attaching it to the lower instrument panel (1).




3. Install the lower instrument panel onto the upper instrument panel.
4. Install the screw in the lower instrument panel.
5. Install the illumination control module (7).
6. Install the screws attaching the illumination control module (7) to the instrument panel and to the support bar (6) on the side.
7. Install the cover (2) under the steering column. Then install the screw (3).
8. Install the side air nozzle.