Courtesy Lamp Switch/Unit

REMOVAL
1. Disconnect the negative battery cable.




2. Using a trim stick (1) press the clips located on the edge of the courtesy lamp switch/unit body (2) and release the lens cover.




3. Remove the retaining screws and lower the courtesy lamp switch/unit from the headliner opening.
4. Disconnect the courtesy lamp switch/unit harness connector and remove from the vehicle

INSTALLATION
1. Connect the courtesy lamp switch/unit harness connector (1) and align into the headliner opening.




2. Install the retaining screws and secure
3. Install the lens cover into the courtesy lamp switch/unit body
4. Connect the negative battery cable