Exterior Lighting Systems

Headlight operation:

Turn the headlight switch clockwise to the first position to illuminate the parking, tail, side marker, license plate, and instrument panel lights; turn to the second position to turn on the headlights. Pull the headlight switch out one position to operate the fog lights; if the headlight switch is pulled out to the second position the operation is the same as the first position: DO NOT REPLACE THE HEADLAMP SWITCH! The second position is used for rear fog lamps which are used in international markets. Push the headlight switch back in, or turn on the high beams (push the multi-function control lever toward the instrument panel) to deactivate the fog lamps.

Night Security Illumination:

After the last door is closed, the exterior lights will illuminate for approximately 30 seconds.

Standing Lights:

With the key in the OFF position and the vehicle parked, rotate the headlight switch counter-clockwise one position from the OFF position to activate the parking lights on only the right side of the vehicle. Rotate the headlight switch counter-clockwise two positions from the OFF position to activate the parking lights on only the left side of the vehicle. This feature is used in international markets when the vehicle is double parked. DO NOT REPLACE THE HEADLAMP SWITCH!

NOTE:
THE STANDING LIGHTS WILL NOT OPERATE WITH THE IGNITION IN THE ON POSITION.

NOTE:
IF THE HEADLIGHTS OR PARKING LIGHTS ARE LEFT ON AFTER THE IGNITION IS TURNED OFF, A WARNING WILL SOUND IF THE DRIVER'S DOOR IS OPENED. IF THE STANDING LIGHTS ARE LEFT ON, NO WARNING WILL SOUND!

NOTE:
THE BATTERY WILL GO DEAD IF THE HEADLAMP SWITCH REMAINS IN EITHER STANDING LIGHTS POSITION (COUNTER CLOCK-WISE FROM THE OFF POSITION) WITH THE KEY IN THE OFF POSITION (NO BATTERY DRAIN PROTECTION).