Assembly

Fig. 121 Differential Bearing Shim:

ASSEMBLY
1. Install differential bearing select shim into clutch bellhousing pocket (Fig. 121).

Fig. 122 Differential Bearing Cup Installation:

2. Using Tool 8866 and Driver Handle C-4171, install differential bearing cup into clutch bellhousing until cup bottoms into bore (Fig. 122).

Fig. 123 Input Shaft Bearing Orientation:

3. Position input shaft bearing to bore with letters outward (Fig. 123).

Fig. 124 Input Shaft Bearing Installation:

4. Using Tool 8921 and Driver Handle C-4171, install input shaft roller bearing until it bottoms in bore (Fig. 124).

Fig. 125 Output Shaft Bearing Race Orientation:

5. Install output shaft bearing race to bore. Orient smaller inside diameter downward (toward case) (Fig. 125).

Fig. 126 Output Shaft Bearing Installation:

6. Using Tool 8871 and Driver Handle C-4171, install output shaft bearing race until it bottoms in bore (Fig. 126).

Fig. 127 Shift Shaft Ball Bearing Installation:

7. Using appropriate end of Tool 8868, install shift shaft ball bearing until tool bottoms on case (Fig. 127).

Fig. 128 Input Shaft Seal Installation:

8. Using Tool 8864, install input shaft oil seal until tool bottoms on case (Fig. 128).