Disassembly

CLUTCH BELLHOUSING
DISASSEMBLY

Fig. 115 Input Shaft Seal Removal:

1. Using suitable punch/drift, remove input shaft seal (Fig. 115) and discard.

Fig. 116 Output Shaft Bearing Removal:

2. Remove output shaft roller bearing (Fig. 116).

Fig. 117 Shift Shaft Ball Bearing Removal:

3. Using Tool 8868, drive out shift shaft needle bearing (Fig. 117) and discard.

Fig. 118 Differential Bearing Cup Removal:

4. Using Tools 8915 and 8913, remove differential bearing cup from clutch bellhousing (Fig. 118).

Fig. 119 Input Shaft Bearing Removal:

5. Using Tools 8915 and 8912, remove input shaft roller bearing from clutch bellhousing (Fig. 119).

Fig. 120 Output Shaft Bearing Race Removal:

6. Using Tools 8915 and 8913, remove output shaft bearing race from clutch bellhousing (Fig. 120).