Detent Plugs

Fig. 129 Detent Plug Identification:

Fig. 130 G288 Transaxie Shift System:

DETENT PLUG / DESCRIPTION
The 288 Transaxle utilizes four (4) shift rod detent plugs (Fig. 129) (Fig. 130). The detent plug is a spring-loaded ball assembly that engages shift rod recesses, providing a positive shift feel while maintaining gear position.





DETENT PLUG / REMOVAL
1. Remove transaxle assembly.

Fig. 131 Detent Plug Removal:

2. Using Tool 8870 attached to Tool C-3752, remove detent plug(s) from transaxle case (Fig. 131).


INSTALLATION

NOTE: Inspect detent plug for signs of wear or damage. If necessary, replace detent plugs with new upon installation.

Fig. 132 Detent Plug Installation:

1. Install detent plug into case (Fig. 132).

Fig. 133 Seat with Soft-Tipped Hammer:

2. Using soft-tipped hammer, drive detent plug into case until it bottoms (Fig. 133)
3. Install transaxle assembly.