Passenger Power Seat Recliner Motor Inoperative

PASSENGER POWER SEAT RECLINER MOTOR INOPERATIVE

Passenger Power Seat Recliner Motor Inoperative:

POSSIBLE CAUSES
- Passenger power seat recliner motor
- Passenger power seat recliner motor circuit
- Passenger power seat switch

DIAGNOSTIC TEST

1. TEST THE PASSENGER POWER SEAT RECLINER MOTOR




Turn the ignition off.
Disconnect the Passenger Power Seat Recliner Motor connector.

NOTE: Check connectors - Clean/repair as necessary.

Connect a jumper wire from B(+) to one cavity of the Passenger Power Seat Recliner Motor connector (motor side).
Connect a second jumper wire from ground to the other cavity of the Passenger Power Seat Recliner Motor connector (motor side).
Note seat movement, if no recliner movement is noted, reverse the jumper wires at the Recliner Motor connector.

Q: Did the Passenger Power Seat Recliner move backward or forward?

YES: Replace the Passenger Power Seat Switch. Perform BODY VERIFICATION TEST. Body Verification Test
NO: Replace the Passenger Power Seat Recliner Motor. Perform BODY VERIFICATION TEST. Body Verification Test