LR Wheel Spin CAN Message Not Valid

LR WHEEL SPIN CAN MESSAGE NOT VALID





POSSIBLE CAUSES
- ABS WHEEL SPEED SENSOR DTC PRESENT
- CONTROLLER ANTILOCK BRAKE MODULE
- SHIFT LEVER ASSEMBLY

For a complete Shift Lever Assembly Circuit Diagram.

Diagnostic Test
1. CAN BUS OR ABS DTC PRESENT





Turn the ignition on.
With the DRB III*, read the ABS DTCs.
Are any CAN Bus or Wheel Speed Sensor DTCs present?
Yes>>Refer to the Brakes - ABS Electrical Diagnostics category and perform the appropriate symptom.
No>>Go To 2

2. CAB - ABS LR SENSOR MESSAGE





Turn the ignition off.
Replace the Controller Antilock Brake Module.
Start the engine.
Road test the vehicle.
With the DRB III*, read ABS DTCs.
Did DTC LR WHEEL SPIN CAN MESSAGE NOT VALID set again?
Yes>>Replace the Shift Lever Assembly.
Perform NAG1 TRANSMISSION VERIFICATION TEST. Verification Tests
No>>Test Complete.