RR Wheel Spin CAN Message Not Valid

RR WHEEL SPIN CAN MESSAGE NOT VALID





POSSIBLE CAUSES
ABS WHEEL SPEED SENSOR DTC PRESENT
CONTROLLER ANTILOCK BRAKE MODULE
SHIFT LEVER ASSEMBLY

Diagnostic Test
1. CAN BUS OR ABS DTC PRESENT





Turn the ignition on.
With the DRB III*, read the ABS DTCs.
Are any CAN Bus or Wheel Speed Sensor DTCs present?
Yes>>Refer to the Brakes - ABS Electrical Diagnostics category and perform the appropriate symptom.
No>>Go To2

2. CAB - ABS RR SENSOR MESSAGE





Turn the ignition off.
Replace the Controller Antilock Brake Module.
Start the engine.
Road test the vehicle.
With the DRB III*, read ABS DTCs.
Did DTC RR WHEEL SPIN CAN MESSAGE NOT VALID set again?
Yes>>Replace the Shift Lever Assembly.
Perform NAG1 TRANSMISSION VERIFICATION TEST. Verification Tests
No>>Test Complete.