Engine Control Module: Service and Repair

REMOVAL




1. Disconnect the negative battery cable (2).
2. Slide the clips forward to remove the plastic control module box cover (1).




3. Holding the metal powertrain control module retaining clip (1) back, pull the powertrain control module up and out of the control module box.




4. Disconnect the electrical connectors (1) and remove the powertrain control module (2).

INSTALLATION




1. Connect the electrical connectors (1) to the powertrain control module (2).
2. Install the powertrain control module into the control module box.




3. Push the powertrain control module into the metal powertrain control module retaining clip (1).




4. Install the plastic control module box cover (1) and slide the clips rearward to lock the cover.
5. Connect the negative battery cable (2).