Hazard Warning Flasher: Service and Repair

REMOVAL

Combination Flasher:

The flasher is mounted to the back side of the multi-function switch. The flasher is serviced separately from the multi-function switch.

1. Open hood.
2. Disconnect and isolate the battery negative cable.
3. Remove the upper steering column shroud.
4. The flasher can be removed by pulling it toward the instrument cluster (forward).

INSTALLATION
The flasher is mounted to the back side of the multi-function switch. The flasher is serviced separately from the multi-function switch.

1. Align the combo-flasher tabs and push into place.
2. Install the upper steering column shroud.
3. Connect the battery negative cable.
4. Close hood.
5. Verify vehicle and system operation.