Rear Center Seat Belt and Retractor
REMOVAL1. Detach Quick Connect Anchor by depressing tab.
2. Remove seat bezel.
3. De-trim seat back upper.
4. Lock seat back latch.
5. Disconnect Locking Cable from retractor.
6. Remove retractor bolt.
7. Feed webbing and hardware through seat frame and remove retractor.
INSTALLATION
1. Feed webbing and hardware through seat frame and install retractor.
2. Install retractor bolt and tighten to 40 N.m (30 ft.lbs.).
3. Connect locking cable to retractor.
4. Unlock seat back latch.
5. Re-trim rear seat back cover.
6. Install seat bezel.
7. Attach Quick Connect Anchor.