Rear Wiper Arm Replacement

REMOVAL
1. Remove the rear wiper arm nut cap
2. Remove wiper arm retaining nut.

Wiper Arm Puller:

3. Use a battery terminal puller to remove the wiper arm from the wiper pivot.

INSTALLATION
Before installation activate wiper system to ensure the wiper module is in the PARK position. Position wiper arm so that the tip of the blade is on the park line on the windshield.

NOTE: Blade should be parked along bottom rear window defogger grid line. Vertical tick mark shows park tolerance.

Fig.5 Rear Windshield Wiper Arm Remove/Install:

Fig.6 Rear Windshield Wiper Arm/Blade Tick Mark:

1. Install the arm on the pivot and position to tick mark.
2. Install wiper arm retaining nut and torque to 18 - 20 Nm (160 - 175 in. lbs.).
3. Install the rear wiper arm nut cap.
4. Verify system operation.