Power Top Relay Inoperative

SYMPTOM
POWER TOP RELAY INOPERATIVE

WHEN MONITORED
Whenever the module is awake.

SET CONDITION
If the voltage on either the Top Down or Top Up Relay Control circuit does not drop to below 1.0 volts when a top up or top down command is sensed at the Power Top Switch Mux circuit, this code will set.

POSSIBLE CAUSES
- Window module inoperative

Repair Instructions:

WINDOW MODULE INOPERATIVE

If there are no other trouble codes present, replace the Window Regulator Module in accordance with service information.
Perform BODY VERIFICATION TEST - VER 1. Body Verification Test