Hood Stop: Service and Repair

BUMPER - ADJUSTMENT

REMOVAL




1. Open and support the hood.
2. Unscrew the adjustment bumper(s) (1) from the mounting hole(s) in the top of the upper radiator support (2).
3. Remove the adjustment bumper(s) from the vehicle.

INSTALLATION




1. Install the hood adjustment bumper(s) (1) into the mounting hole(s) located in the top of the upper radiator support (2).
2. Adjust the adjustment bumper(s) in or out of the upper radiator support as necessary to achieve proper hood alignment. The hood should fit flush across the top surfaces along fenders and have even gaps aligned to 4 mm (0.160 in.) to the adjacent body panels.