Cargo Area Floor Carpet - Convertible

CARGO AREA FLOOR CARPET - CONVERTIBLE

REMOVAL




1. Fold down both rear seats.
2. Release rear seat latch from inside of the trunk.
3. Remove attaching screw from (2) left and right rear seat fold forward check strap (1).




4. Remove rear seat pivot bezels (2).
5. Remove rear seats.
6. Remove left and right seat belt anchor for the rear seat.




7. Remove rear floor pan cargo and flat tire tie down loop attaching screw.
8. Remove push pin fasteners (2) from front edge of the carpet.
9. Remove cargo scuff plate.




10. Pull carpet from behind quarter trim panel and cargo trim panel.
11. Fold carpet in half.
12. Remove carpet from vehicle.

INSTALLATION




1. Place carpet into position.
2. Slip carpet under quarter trim panel and Cargo trim panel.




3. Install push pin fasteners (2) in front edge of the carpet (3).
4. Install rear floor pan cargo and flat tire tie down loop attaching screw.
5. Install cargo scuff plate.
6. Install left and right seat belt anchor for the rear seat.
7. Install rear seats.




8. Install rear seat pivot bezels.




9. Install attaching screw (2) for left and right rear seat fold forward check strap (1).
10. Place seat in the up right position.