Floor Carpet

FLOOR CARPET

REMOVAL




1. Remove front seats.
2. Remove rear seats from vehicle.
3. Remove door sill trim covers.
4. Remove cowl trim covers.
5. Remove center floor console.
6. Remove rear seat pivot bezels and striker bezel.
7. Remove lower fasteners from B-pillar trim panel.




8. Remove rear floor pan cargo and flat tire tie down loop (2) attaching screw.
9. Pull carpet from behind quarter trim panel.
10. Fold carpet in half toward rear seat.
11. Remove carpet through rear door opening.

INSTALLATION




1. Install carpet (1) through liftgate opening.
2. Unfold carpet.
3. Tuck carpet behind quarter trim panel.




4. Install lower fasteners holding B-pillar trim panel.
5. Install center floor console.
6. Install cowl trim covers.
7. Install rear seat pivot bezels and striker bezel.
8. Install door sill trim covers.
9. Install bolts attaching front seat belt lower anchors to floor. Tighten all seat belts to 40 N.m (30 ft. lbs.).
10. Install front seats.
11. Install rear floor pan cargo and flat tire tie down loop attaching screw. Tighten screw to 12 N.m (105 in. lbs.).
12. Install rear seats.