Removal and Replacement
HEADLINER - COUPEREMOVAL
Fig. 1:
1. Fully recline front seats and fold rear seats forward.
2. Remove screws attaching sun visors (2) to roof header panel.
3. Disconnect wire connector from lighted vanity mirror, if so equipped
4. Remove trim lace, if equipped with sun roof.
5. Remove sun visors (2) from vehicle.
6. Remove A-pillar trim covers.
7. Remove B-pillar trim panels.
8. Remove C-pillar and D-pillar trim panels.
9. Remove assist handle, if so equipped.
10. Remove sun visor hooks.
11. Remove coat hooks, if so equipped.
12. Remove two push in fasteners at rear of headliner.
13. Disengage wire connector, at base of A-pillar.
14. Remove push in fastener attaching wiring to A-pillar.
15. Remove headliner through rear hatch.
INSTALLATION
1. Load headliner through rear hatch.
2. Install sun visor hooks, if so equipped.
3. Install two push in fastener at rear of headliner.
4. Install coat hooks, if so equipped.
5. Install assist handles, if so equipped.
6. Install push in fastener attaching headliner wiring to A-pillar.
7. Connect wire connector, at base of A-pillar.
8. Install C and D-pillar trim.
9. Install B-pillar trim panels.
10. Install A-pillar trim covers.
11. Install trim lace, if equipped with sun roof.
12. Install sun visors (2), lighted vanity mirror wire connector, if so equipped, and screws attaching sun visors to roof header panel.