A-Pillar Trim

A - PILLAR TRIM

REMOVAL

COUPE




1. Disengage clips attaching trim to A-pillar.
2. Remove A-pillar trim (1) from vehicle.

CONVERTIBLE




1. Remove sun visor retainers and sun visors.
2. Remove center header trim molding from the windshield surround header. Refer to Trim Panel.
3. Using a trim stick, remove A-pillar trim panel (3).

INSTALLATION

COUPE




1. Position A-pillar trim (1) panel to A-pillar.
2. Align locating pins on backside of trim panel to mating holes in A-pillar.
3. Push clips on trim panel into slots in A-pillar.

CONVERTIBLE




1. Place A-pillar trim panel into position (3).
2. Push clips on A-pillar trim panel (3) to the seated position.
3. Install center header trim molding to the windshield surround frame.
4. Install sun visor retainers and sun visors.