Sun Shade: Service and Repair

REMOVAL
1. Remove sunroof glass panel.

Guide Assembly Trough:

2. From the top of the vehicle through the roof opening remove the two screws (one LH and one RH side) attaching trough assembly to trough guides.
3. Remove trough assembly.
4. From the top of the vehicle through roof opening slide the sunshade forward, disengaging sunshade front guide feet through front opening in tracks.
5. Continue to pull the sunshade forward and rotate sunshade until rear guide feet are disengaged from tracks and sunshade is completely free from the sunroof assembly.

CAUTION: Use care not to crease the sunshade when removing or installing.

INSTALLATION
1. From top of the vehicle through roof opening place sunshade into position, rotating rear guide feet of sunshade into opening of track.
2. Guide front sunroof feet through front opening and into the track grooves.
3. Set trough assembly in position on sunroof assembly. Ensure that the trough crosses over the top of the sunshade.
4. Install two screws attaching trough guide to trough assembly. Tighten screw to 1 N.m (9 in.lbs.) torque.