Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2005 >> PT Cruiser L4-2.4L Turbo VIN E >> Repair and Diagnosis >> Cruise Control >> Cruise Control Servo >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Servo: Service and Repair

REMOVAL
1. Disconnect the negative battery cable.

Fig. 7 Throttle Control Shield:





2. Remove the throttle control shield.
3. Remove the speed control cable from the throttle body lever.

Fig. 9 Vacuum And Electrical Connection:





4. Remove the vacuum line from the speed control servo.

Fig. 10 Speed Control Servo - 2.4L Turbo:





5. Remove the 2 nuts from the speed control servo studs.
6. Push and pull up the speed control servo from the mounting bracket.
7. Unlock and disconnect the electrical connector from the speed control servo.
8. Remove the 2 push clips and discard.

Fig. 11 Cable Clip:





9. Remove the retaining clip holding cable to servo.

INSTALLATION
1. Install the retaining clip holding cable to servo.
2. Connect and lock the electrical connector to the speed control servo.
3. Install the speed control servo to the mounting bracket.
4. Install the 2 nuts from the speed control servo studs.
5. Install the vacuum line to the speed control servo.
6. Install the speed control cable to the throttle body lever
7. Install the throttle control shield.
8. Connect the negative battery cable.

pro multis · About Operation CHARM