Instrument Panel Center Bezel

REMOVAL
1. Open hood.

Battery Negative Cable Removal/Installation:

2. Disconnect and isolate the battery negative cable.

Front Power Window Switch:

3. Using a trim stick (special tool #C-4755) or equivalent, gently pry out the front power window switch from the instrument panel switch bezel and disconnect the switch electrical connector.

HVAC Control Knobs:

4. Remove HVAC control knobs from control head.

Instrument Panel Center Bezel And Retaining Screw:

5. Remove one retaining screw to center bezel inside window switch opening.
6. Using a trim stick or equivalent, gently pry the center bezel out of the instrument panel and remove from vehicle.

INSTALLATION
1. Place center bezel over opening. Align the retaining clips and press firmly into place.
2. Install one center bezel retaining screw.
3. Reconnect the front power window switch connector and reinstall into center bezel opening.
4. Install the four HVAC control knobs.
5. Reconnect the battery negative cable.
6. Close hood.
7. Verify operation of vehicle and systems.