Boost Solenoid: Service and Repair

REMOVAL





NOTE: For specific solenoid location, refer to (Fig. 45).





1. Remove nuts securing solenoid mounting bracket to shock tower (Fig. 46).
2. Disconnect solenoid electrical connector.
3. Disconnect vacuum harness connector from solenoid.





4. Push on solenoid lock tab and slide solenoid off bracket (Fig. 47).

INSTALLATION
1. Slide solenoid onto mounting bracket until lock tab engages (Fig. 47).
2. Connect vacuum harness connector to solenoid.
3. Connect solenoid electrical connector.
4. Install nuts securing solenoid mounting bracket to shock tower (Fig. 46).