Intake Manifold

Non-Turbo Upper





Intake Manifold
Upper-Bolts 12 Nm (105 inch lbs.)

Non-Turbo Lower





Intake Manifold
Lower-Bolts 12 Nm (105 inch lbs.)

Turbo Upper





Intake Manifold
Upper-Bolts (Turbo)

NOTE: This engine could be equipped with either a plastic intake manifold or an aluminum intake manifold.

Position upper intake manifold on lower intake manifold.

Aluminum intake manifold
Tighten manifold fasteners to 28 Nm (250 inch lbs.)
Sequence shown in (Fig. 152).
Plastic intake manifold
Tighten manifold fasteners to 12 Nm (105 inch lbs.)
Sequence shown in (Fig. 152).

Turbo Lower





Intake Manifold
Lower-Bolts (Turbo)

Note: Turbocharged Engine: Replace lower intake manifold gasket.

Aluminum manifold
Tighten fasteners to 28 Nm (250 inch lbs.)
Sequence shown in (Fig. 154).
Plastic manifold
Tighten fasteners to 12 Nm (105 inch lbs.)
Sequence shown in (Fig. 154)